It's really uncomfortable to have foggy glasses with sweat
In the paint shop, Protective Glasses fog up as soon as you breathe, and Safety Goggles make your temples numb. You have to take off your Gloves before putting them on again. You change protective gear eight times a day, which drags down the yield rate. Multi-Color Safety Face Shield combines Safety Mask, eye protection, and anti-flying debris into one: a whole piece of 0.1 mm optical grade PET, light transmittance ≥92%, double-sided anti-fog coating passed EN166/ANSI Z87.1 dual certification; 35 mm breathable EVA is used for the forehead cushion, and the indentation is <2 mm when worn continuously for 4 hours. Seven-color magnetic shell, red/yellow/blue/green/orange/purple/white, can identify the type of work at a glance on site to reduce cross contamination. The actual measurement shows that the lens does not fog up under 40 ℃ and 85% RH conditions, and the interception rate of paint particles above 3 μm is >95%, which has reduced the rework rate from 7% to 1.2% for a certain automobile factory.
Product Features
① Three-in-one structure, disassembly and assembly in 5 seconds, rinse with water
② Seven-color magnetic shell, zero communication for job identification
③ Anti-fog + anti-scratch double coating, still clear after 100 washes
Tips
1. Wipe the anti-fog layer with alcohol cotton every day after work, air dry before bagging, and the life span will be extended by 30%
2. Replace the shell in time when it fades to ensure reliable color management
