Is it difficult to have a good vision with a mask?
When working on the construction site, the combination of hard hats and facial protection is often awkward: wearing Safety Shoes and Protective Glasses, the mask always blocks the operator's vision due to the narrow field of vision; changing to a lightweight model, it cannot block the splashing sand and dust, and it always slips when worn with Safety Goggles. A master said: "Either the protection is not in place, or the vision is not clear, and it always feels like working with arms tied."
This yellow hard hat integrated PVC protective mask is specially designed to solve these troubles! The high-transmittance PVC mask fits the face with a curvature, and the field of vision is 30% larger than that of ordinary models. The corners are also clear when looking down at the drawings; the snap-on design is precisely stuck on the front edge of the hard hat, and it does not shake or press the nose when worn with safety goggles. With protective glasses and safety shoes, it protects from head to toe without dead angles. After a certain infrastructure team tried it, the operating errors caused by obstructed vision were reduced by 70%, and the mask slippage completely disappeared.
Two core advantages
① Full field of view protection: 2mm thick PVC lens has a light transmittance of 92%, passed the ANSI Z87.1 impact test, and takes into account both clarity and safety;
② Safety helmet adaptation: The snap-on design is compatible with 80% yellow safety helmets and does not conflict with safety goggles.
Practical tips
1. Rinse the lens with clean water after each use, avoid wiping with alcohol to prevent aging of the PVC material;
2. Avoid heavy pressure when storing, and hang it in a dry place to extend the clarity of the lens.
