http://www.xzsafetymask.com
Home > Products > Safety Helmet Hat > Red Construction Hats for Worker Protection

Red Construction Hats for Worker Protection

Basic Info

Brandxinbaisheng

Additional Info

PackagingCarton packing

Productivity5 million pieces /year

TransportationOcean,Land,Air,Express

Place of OriginCHINA

Supply Ability5 million pieces /year

PortSHANGHAI,QINGDAO,LIANYUNGANG

Product Description
Are safety helmets not protective enough?
 
There are frequent falling objects and mechanical collisions at construction sites. Ordinary safety helmets have limited protective performance and are difficult to withstand high-intensity impacts. They cannot effectively cooperate with protective equipment such as Protective Glasses, Safety Goggles, Face Shield, and Safety Shoes. Workers often say: "Even if the safety helmet is dented, the eyes and face are still easily injured. Safety shoes are not non-slip, and I am nervous when working."
 
Our orange construction safety helmets protect workers' safety with "full-dimensional protection + intelligent early warning"! It uses a high-strength ABS engineering plastic shell with an energy-absorbing lining, and its impact resistance is twice that of the national standard; the widened brim design seamlessly connects with the Face Shield, increasing the protection area by 40%; the built-in sensor chip can link the mobile phone APP to issue an alarm when the distance from the head changes abnormally. In actual application, this safety helmet reduces the risk of head injury by 85%. When used with safety goggles and Protective glasses, the efficiency of eye protection is increased by 70%. When used with non-slip Safety shoes, the overall safety accident rate is reduced by 60%.
 
Three core advantages
① Military-grade impact resistance: After a 10-meter high-altitude drop test, the cap body does not deform or break;
② Intelligent interconnection system: built-in sensors monitor wearing status and environmental risks in real time;
③ Ergonomic design: 6-point breathable lining, no stuffiness when worn for a long time, and head pressure is reduced by 50%.
Practical maintenance tips
1. Appearance inspection: Check the cap body for cracks and loose lining every week, and replace it immediately if any problems are found;
2. Cleaning and maintenance: Wipe the helmet with a neutral detergent every month to avoid exposure to the sun to prevent material aging;
3. Life management: It is recommended to replace it every 2 years. Even if there is no obvious damage, the material performance will naturally decay.
 
 
 
lQDPJx0KDr9fAIvNBQDNBQCwne6uEhTUYB4IBkyBLV9MAA_1280_1280lQDPKGusRgNskgvNArbNAu6wmk7-pBCwlogIBkxozzX4AA_750_694lQDPKHvw2Y3PowvNAozNAu6wXjnXlph0p3IIBkxpogV9AA_750_652

Product Categories : Safety Helmet Hat

Product Images
  • Red Construction Hats for Worker Protection
  • Red Construction Hats for Worker Protection
  • Red Construction Hats for Worker Protection
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters