Welding goggles fog up and you can't see clearly?
During welding operations, goggles fog up and can be called an "invisible killer" - not long after putting on Safety Goggles, the lenses are covered with a layer of white fog. You can't see the weld clearly and can only take off the glasses repeatedly to wipe them, and the risk of molten iron splashing instantly soars. Even with the double protection of Protective Glasses, the fog still penetrates everywhere, and even the Safety Shoes under your feet seem to be unstable. Workers often say: "No matter how complete the protective gear is, it's useless if you can't see clearly!"
Our anti-fog welding goggles use black technology to solve this problem! The lenses use nano-level anti-fog coatings, combined with a one-way exhaust valve design, the hot air generated during welding is quickly discharged without backflow, and the lenses remain clear after 6 hours of continuous operation. The frame is made of food-grade silicone, which fits well with Protective glasses without slipping, and the edge sealing reaches IP54 level, which can block splashing sparks and does not affect the movement of the footsteps of Safety shoes. A mechanical processing plant measured that after workers wore them, the operating errors caused by blurred vision decreased by 92%, and the welding efficiency increased by 35%.
Two core advantages
① Long-lasting anti-fog technology: Nano coating + exhaust valve double protection, stable anti-fog effect in -10℃ to 60℃ environment;
② Safe and compatible design: Lightweight frame is suitable for all kinds of protective glasses, without pressing the bridge of the nose or the face.
Maintenance tips
1. Wipe the lens with a special lens cloth to avoid touching the anti-fog coating with your fingers;
2. Put it in a dry lens box when storing, away from high temperature and oily environment to extend the anti-fog effect.
